Cylinder converters.
Converts a direct cylinder into an indirect cylinder.
Can be used in conjunction with a solar panel.

Can be either top entry  Click to view large   or side entry  Click to view large

Standard Sizes:
12".... £34.70 each + VAT
16".... £41.30 each + VAT
27".... £46.25 each + VAT

  • Note: Units can be made to almost any length. Please contact us for a price.


  • Carriage...UK mainland... £17.50 + VAT for up to four units.
    Carriage on larger quantities please ask.

    Cylinder converter heat exchanger suface areas.
    Size.
    12"   .... 0.093m2
    16"   .... 0.122m2
    27"   .... 0.215m2


  • Pipe connections are 15mm copper pipe.
  • Screws into a 2¼" brass boss
  • All components are BS standard and all joints are brazed together.
  • They are supplied with a fibre sealing washer.
  • All units are acid cleaned.
  • payment by cheque or bank transfer.





  • End connections.


    view of the end connections



    Lower end return tube


    cylinder-converter



    Brass Boss


    cylinder-converter



           Size of heat exchangers for solar panels.

          In solar systems with 0.5 Ltr/minute or above flow rate per m2 solar collector,
          there should be no less than 0.2m2 heat exchange area per m2 net absorber solar collector area.

          In solar systems with below 0.5 Ltr/minute flow rate per m2 solar collector,
          there should be no less than 0.1m2 heat exchange area per m2 net absorber solar collector area.



  • Back to the top